One-Sided Steering Brace (2013-2026 Ram 2500/3500 4×4)

Description

A steering brace for 2014-2026 Ram 2500 4×4 and 2013-2026 Ram 3500 4×4 trucks with the radius arm front end, designed to work with all torsion sway bars.

The concept is simple: don’t fight what you can’t control. No steering brace stops frame flex. With a frame-to-frame brace, the frame twists, the brace twists with it, and that lateral motion goes straight into your steering box sector shaft. This brace is one-sided, so it doesn’t tie the frame rails together and frame flex never gets fed into your steering box.

Key features

• One-sided design keeps frame flex out of the steering box
• All 1/4″ steel construction with 1/4″ wall 2″ x 2″ square tubing as the backbone (about 11 lbs)
• High-quality, greaseable bearing that’s easy to replace
• Bolts up in minutes with all new Grade 8 hardware
• Works with all sway bars, including torsion sway bars
• Works on all models, including the Power Wagon

What’s included

• Steering brace with greaseable bearing
• All new Grade 8 mounting hardware (you reuse the factory steering box bolt)

Install notes

The brace mounts between the sway bar bracket and the frame using the provided hardware. You reuse the factory steering box bolt.

Note: This brace does not work with sway bar drop brackets or relocation brackets. Remove them and run longer sway bar end links instead.